DW -Pro 9200 Series, Operation Instructions Manual

Page: 59 / 114

17
18
19
[Zooming out when motion was detected] Full Screen
• When motion is detected, the screen will go from
current to full size.
• Enter camera number.
Ex) For setting camera no.1, no.2, no.3,
input “1,2,3”.
[Caution]
Put comma ( , ) after camera number.
!
[Delay time
(second)
]
• This function will maintain status of full screen when
motion is captured.
Time unit is set to second (sec.).
[Cancel Screen zooming]
• It cancels Screen Zooming when motion was
detected.
20
[Color of motion area]
• This function is to set motion area when motion is
detected.
• You can select either green or red color.
21
[Screen rotation by 4 channels (second).]
• This function rotates with 4 channels in a split
screen consecutively.
• Rotation time should be set.
[Caution]
Do not set the time as ‘0’. Screen will rotate
too fast, therefore, image from the screen will
be unrecognizable. So more than 1 second is
highly recommended.
!
L‰ L‰ L‰ L‰
LQ
LQ LQ
LQ