DW -Pro 9200 Series, Operation Instructions Manual

Page: 87 / 114

1.14 E-Map Setup
L
L L
L
õ
*
$
‡
¤
T 9
&
•
This function enables to easily confirm the
operational condition of the camera, control,
sensor with the actual area which similarly
appears in the E-map image.
• Select in order to setup the location for
camera, control, and center.
• You cannot select setup button for camera,
control, sensor if you do not select [use e-map].
You can use existing stored information but
existing E-map information cannot be used.
L L L L
[Position Number]
• User can choose location of the E-map image
divided by each mode.
• It can be located each in all cameras by 4, 6, 9,
10, 13, 16 divisions of detection mode.
• E-map can be setup to a maximum number of
division.
• Copy button from each division will
copy the specific camera location of different
divided mode after the E-map setup.
õ
*
$
5
"% #<$3,Q
9
0&
•
DW9200 program basically provide Emap.bmp
picture file, but this function is used where camera,
control, and sensor is setup to change the actual
plan to the E-Map image.
• When selecting the image file you wish to change
from [Find] button, file will appear and when you
select [Go] button from here, selected image file
will convert and appear as Emap.bmp.
• Regardless of file name and size of the image
which will change, you may select BMP form of
every image, and the existing E-Map image will be
deleted when E-Map image changes.