72
/
102
SM-8 Ev3/08072015
3) Save the value
To safe the value after changing it, you’ll have to push the
“HORN/ENABLE"button. The values are stored now.
4) Check the values
Press the EMERGENCY STOP switch. Wait 2-3 seconds. Release the
EMERGENCY STOP switch again and prepare the control to operate
by pressing the "HORN/ENABLE" button.
If you are not content and want to change the values again, start
over at point 1.
Restore the
factory settings
/ default value
Set all proportional channels to zero position. Release the
EMERGENCY STOP
switch. Wait till the radio connection is present.
Press and hold the buttons
"5"
and
“5 ”
for 5 seconds.
The factory settings / default values are restored automatically.
Release the switches. Press the EMERGENCY STOP switch. Wait 2
seconds. Release the EMERGENCY STOP switch again and prepare
the control to operate by pressing the "HORN/ENABLE" button.
