36
/
102
SM-8 Ev3/08072015
-
In some cases the brake can pull off the pulley of the engine. Therefore press the brake out from the pulley
to remove the V-belt
Mounting: (Take the above steps in reverse order)
-
CAUTION! when changing the engine pulley do not forget install the feather key
-
Loctite all bolts with LOCTITE 243
-
No need to adjust the clutch, check only the distance between the clutch and the blade hub. When the blade
is engaged there should be about 1 mm gap. If the gap is insufficient, and both pieces are touching each
other, replace worn parts of the clutch (clutch plate)
-
When tightening the V-belt do not overload tension of the belt
±10mm
1mm
