Operator’s Manual – Spider CROSS LINER
38
7.3 MOWER SERVICE POSITIONS
VERTICAL SERVICE POSITION
The vertical service position is used for cleaning and maintenance of the cutting device. The mower must be placed
in this position on a firm and level surface only for the duration of the service.
PROCEDURE:
1
Place the mower on a level and solid surface.
2
Rotate the wheels so the portals are aligned with
the cutting height adjustment lever.
3
Switch off the mower and the remote control.
4
Check and make sure the fuel and oil tank caps are
closed tight.
5
Turn the fuel valve off.
6
Set the height of cut to the third position from the
top.
7
Pull the winch guide towards you. It will partially
eject.
(NOTE: If winch rope is too tight, winch guide won’t
pull out. Loosen winch rope)
8
Lift the mower on the winch side by the winch guide
until the mowing height handle rests on the ground.
Obrázek 5 – Poloha skeletu žacího ústrojí
při servisní poloze
Obrázek 6 – Poloha skeletu žacího ústrojí
při servisní poloze
