Operator’s Manual – Spider CROSS LINER
22
4)
Press the activation switch on the
controller.
5)
Hold the switch to the start position
and hold it in this position until the
engine starts.
6)
After starting the engine, set the engine speed to maximum.
If the engine does not start, the mower functions are blocked. In this case, you must press the CENTRAL STOP on
the controller and repeat the starting procedure from the first point.
If any of the warning lights stop signaling while the engine is running or does not shut down properly, stop the engine
as soon as it is safe.
The mower is equipped with an automatic choke for cold starts. After starting the engine, leave the mower
in position for about 2 minutes without the mowing mechanism switched on.
5.4 STOPPING AND PARKING
WARNING
An incorrectly parked mower may spontaneously move in the absence of the operator. Follow the
instructions in the operating instructions for proper parking methods.
Stop the mower on dry and level ground
, where the mower will not pose a risk and / or danger. If you must stop
the mower on a slope and take any action, interrupt work or switch off the engine, etc.,
turn the wheels
perpendicularly to the slope
. This will prevent the mower from moving down the slope.
1) Reduce the pressure on the travel joystick gradually
so that the mower stops smoothly - the joystick will
be in the neutral position.
2) Reduce engine speed.
3) Switch the cutting deck switch to "OFF BLADE".
ACTIVATION SWITCH
ACTIVATION SWITCH
DRIVE JOYSTICK IN THE
NEUTRAL POSITION
PÁKA JOYSTICKU
POJEZDU DO
NEUTRÁLNÍ POLOHY
MINIMUM ENGINE
SPEED
NASTAVENÍ OTÁČEK
MOTORU NA MINIMUM
MOWING DECK OFF
VYPNUTÍ ŽACÍHO
ÚSTROJÍ
ENGINE START/STOP
SWITCH
ENGINE START/STOP
SWITCH
