Operator’s Manual – Spider CROSS LINER
8
3 SAFETY
Each mechanism is potentially dangerous. However, if you operate the product properly and keep it in good working
condition, working with it will be completely safe. If you operate it carelessly or neglect the basic maintenance, it can
be dangerous for you (the operator) as well as others.
You will find warnings in this manual and on the product, read them and follow them. The manual will alert you to
potential hazards and advise you on how to avoid them. If you do not understand the warning messages, ask your
employer or SPIDER distributor / dealer for an explanation.
Please be aware that security is not just a matter of responding to a given alert. You must keep in mind the possible
hazards and try to avoid them for the duration of the work on or with the product.
Do not start working
with the mower
until you are sure that you can operate it properly
.
Do not start working with the mower
until you are sure it is safe for you and others around you.
If you are unclear about the product or work, ask someone who can properly inform you. Do not assume anything.
3.1 SAFETY WARNINGS
Safety instructions are provided in this manual and on the product. Each notification is indicated by a signal word.
The meanings of the signal words are given below.
The words:
'DANGER', 'WARNING', 'CAUTION'
are to be taken seriously. They indicate the likelihood of serious
injury or danger to life if the relevant instructions are not followed.
This safety symbol indicates important safety messages in this manual. When you see this symbol,
be alert to the possibility of injury, carefully read the message that follows, and inform other
operators.
3.2 SAFETY INSTRUCTIONS
•
Do not enter or reach under the machine if it is lifted and not sufficiently supported. The machine should be supported on
places marked by the symbol of a lifting jack.
•
If the engine stops on a slope, it is necessary to secure the wheels against movement (for example with wooden wedges)
•
The mower should only be transported in a container or on a trailer.
•
Check bolt torques at regular intervals. The first check should be done after 8 operating hours. Pay attention to the attachment
of the cutting blade and the proper bolt torque.
•
The attaching flange of the blades or the bolts must not show sign of damage or wear. The bolts must be complete. The blade
must be undamaged, evenly worn and adequately sharp.
•
If you are driving the machine outside of the working area, always turn off the mowing blades and set the maximum mowing
height, otherwise the blades may get damaged.
•
Keep the product clean after use. Do not use gasoline or similar oil products for cleaning.
•
Do not reach into the space under the mower with your hands or feet. Do not reach under the engine cover or into the gear
mechanism.
•
If you are forced to reach under the machine, wait until all rotating parts stop. Attention, it takes some time before blade runs
down! The run-down time depends on the state and wear of the brake/clutch. Have the brake checked at regular intervals at
an authorized servicing facility.
•
While operating, wear closed shoes and work clothing. Do not wear loose clothes that could get caught by the machine, short
trousers or light shoes.
•
It is strictly prohibited for the operator to wear loose clothing.
•
A local risk assessment should determine the need for a face shield.
•
Do not operate the machine after drinking alcohol or using medication influencing perception.
•
Before starting the engine, make sure that the mower blade is disengaged. If the blade switch is in the ON position, the machine
cannot be started. When engaging the mower blade, step aside far enough to be protected against object accidentally thrown
from the mower and to be able to stop the mower in case of an emergency. Do not enter the path of the mower.
•
While operating the mower make sure that the mower is clearly visible at all times and within the range of the remote-control
unit and that you can clearly recognize dangerous situations and react to them properly. Do not abuse the maximum reach of
the remote control.
•
When using the mower, follow all general work safety regulations.
•
Work with the mower may only be started if the mower is not damaged by previous operation.
•
Do not change the engine tuning, especially the engine speed regulator. Do not modify the exhaust pipe.
