DURKOPP ADLER 969 Classic, Service Instructions Manual

Page: 28 / 122

Setting the handwheel scale
26 Service Instructions 969 - 06.0 - 03/2019
5 Setting the handwheel scale
Proper setting
The machine is locked in place at position 2 by the locking peg ( 
p. 22
).
 The handwheel is at the 180° position.
Cover
• Belt cover ( 
p. 17
)
Fig. 14: Setting the handwheel scale
To set the handwheel scale:
1. Disassemble the V-ribbed belt ( 
p. 27
).
2. Loosen the screws (1).
3. Assemble belt cover and handwheel.
4. Lock the machine in place at position
2 ( 
p. 22
).
5. Move the handwheel into the 180° position.
6. Slide a hexagonal wrench through the slot (3) and tighten the adjusting
screw.
7. Remove belt cover and handwheel( 
p. 17
).
8. Tighten the screws (1).
9. Assemble the V-ribbed belt.
10. Assemble belt cover and handwheel.
CAUTION
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before you set the
handwheel scale.
(1) - Screws
(2) - Handwheel
(3) - Slot
③
① ②