DURKOPP ADLER 969 Classic, Service Instructions Manual

Page: 69 / 122

Setting the sewing feet
Service Instructions 969 - 06.0 - 03/2019 67
11.2 Setting the foot stroke
11.2.1 Setting the foot stroke using the hand lever
The hand lever allows the feet to be raised to the heights of 14 mm and
20 mm .
Proper setting
The presser foot rests on the throat plate.
The hand lever is in the inactive position.
 There is a guaranteed clearance of 0.3 - 0.5 mm between the stroke
lever and the drive dog.
Cover
• Head cover ( 
p. 16
)
Fig. 50: Setting the foot stroke using the hand lever
To set the foot stroke using the hand lever:
1. Move the handwheel into the 0° position.
 The presser foot rests on the throat plate.
2. Loosen the screw (2) and leave the hexagonal wrench (3) inserted.
3. Turn the stroke lever (4) so that there is a clearance of
0.3 - 0.5 mm
between the stroke lever (4) and the drive dog (5).
4. Tighten the screw (2).
(1) - Hand lever
(2) - Screw
(3) - Hexagonal wrench
(4) - Stroke lever
(5) - Drive dog
③ ④
⑤
①
②