DURKOPP ADLER 969 Classic, Service Instructions Manual

Page: 16 / 122

Working basis
14 Service Instructions 969 - 06.0 - 03/2019
3.3 Removing and assembling covers
For many types of setting work, you will have to remove the machine
covers first in order to access the components. Each explanation of a
setting step includes information on which cover to remove.
This chapter describes how to remove the individual covers. The covers
need to be refitted in reverse order. Re-installation will, therefore, not be
described unless special requirements have to be followed.
3.3.1 Access to the underside of the machine
Cover
To access the components on the underside of the machine, swivel up
the machine head.
Fig. 1: Access to the underside of the machine
CAUTION
Risk of injury from moving parts!
Crushing possible.
Switch off the machine before removing or
re-assembling covers.
(1) - Machine head
(2) - Bartack
(3) - Lever
①
②
③