![background image](http://html1.mh-extra.com/html/durkopp-adler-0/969-classic/969-classic_service-instructions-manual_2542456101.webp)
Maintenance
Service Instructions 969 - 06.0 - 03/2019
99
16.4 Lubricating the needle bar
Fig. 73: Lubricating the needle bar
To lubricate the needle bar:
1. Remove the head cover (
2. Place the grease gun onto the lubricating nipple (3) on the needle bar
frame (2) and keep pressing until the flow of grease stops.
The lubricating nipple (3) is used to lubricate the needle bar and the
feeding bar of the presser foot.
3. Place the grease gun onto the lubricating nipple (1) on the needle bar
frame and keep pressing until the flow of grease stops.
The lubricating nipple (1) is used to lubricate the upper part of the
needle bar.
4. Assemble the head cover.
5. Press the buttons
P
and
Reset
on the control panel at the same time.
6. Use the buttons
+
and
-
to set the parameter
t 51 14
.
7. Set parameter
t 51 14
to the value
1
and press
OK
to confirm.
8. Switch off the machine.
9. Switch on the machine again.
The machine is ready for sewing, and the counter has been reset.
(1)
- Lubricating nipple
(2)
- Needle bar linkage
(3)
- Lubricating nipple
①
②
③
Summary of Contents for 969 Classic
