DURKOPP ADLER 969 Classic, Service Instructions Manual

Page: 67 / 122

Setting the sewing feet
Service Instructions 969 - 06.0 - 03/2019 65
Fig. 48: Setting the feed stroke of presser foot and sewing foot
To set the feed stroke of presser foot and feeding foot:
1. Move the handwheel into the 0° position.
2. Set the stitch length to 0 .
3. Set the zero stroke of the feet ( 
p. 61
).
4. Loosen the screw (5).
5. Place the plate (3) under the feet so that the feeding foot (4) is
0.3 mm
lower than the presser foot (1).
6. Manually move both feet down as far as they will go.
7. Tighten the screw (5).
(1) - Presser foot
(2) - Working position
(3) - Plate
(4) - Feeding foot
(5) - Screw
③ ④
⑤
①
②