DURKOPP ADLER 512/532, Operating Instructions Manual

Page: 91 / 100

Troubleshooting
Operating Instructions 512/532 - 05.0 - 04/2018 89
E 5 0 7 Own seam
appearances
read error Read error U01 ~ U10 • Download data again.
E 5 0 8 Own seam
appearances file
error Read error U01 ~ U10 • Check the file type.
E 5 0 9 Own seam
appearances file
error Read error U01 ~ U10 • Check the file type.
E 5 1 0 Own seam
appearances file
error Read error U01 ~ U10 • Check the file type.
• Store the data anew on
the USB stick.
E 5 1 1 USB write error File with the same name
already present
• Delete or rename the file.
E 5 1 2 USB read error Data cannot be loaded from
the USB stick • Check the USB stick.
• Plug in the USB stick
again.
E 5 1 3 USB write error Data cannot be copied to the
USB stick. • Check the USB stick.
• Plug in the USB stick
again.
E 5 5 0 Data write error Flash memory transfer error • Main power switch OFF.
• Repeat the procedure.
• Replace the mainboard.
E 5 5 1 Internal process
error Software error • Main power switch OFF.
• Repeat the procedure.
• Replace the mainboard.
• Replace the software.
E 7
7 0
3 7
5 Motor signal
error Encoder / motor has no
signal • Check the motor /
encoder.
E 7 3 6 Motor rotation
error Motor stops after a certain
time / encoder has no signal • Check the motor /
encoder.
E 7 3 7 Z phase error Z signal no longer changes • Check the motor /
encoder.
E 7 3 8 Z phase error Z signal inaccurate / encoder
has no signal • Check the motor /
encoder.
Error message Description Possible cause Remedy