DURKOPP ADLER 512/532, Operating Instructions Manual, Page: 35 / 100

Programming
Operating Instructions 512/532 - 05.0 - 04/2018 33
4.5.6 Recalculate the button hole clearance
(class 532) (from software version M2.10)
The button hole clearance is preset to 3.4 mm. From software
version M2.10 the seam appearance can be changed directly at
the control panel, by 0.1 mm steps.
A percentage conversion is no longer required.
4.5.7 Recalculate the bartack dimensions (class 512)
(software version up to M2.10)
The following formula is used for converting the preset dimensions
to the desired dimensions:
Value to be set =
(100 % : preset dimension) * desired value
Example Preset dimension in the X direction = 16 mm
Desired value in the X direction = 10 mm
Value to be set = (100 % : 16 mm) * 10 mm = 62.5 %
2 59 3.9 115 5.8 171
2.1 62 4 118 5.9 174
2.2 65 4.1 121 6 176
2.3 68 4.2 124 6.1 179
2.4 71 4.3 126 6.2 182
2.5 74 4.4 129 6.3 185
2.6 76 4.5 132 6.4 188
2.7 79 4.6 135 6.5 191
2.8 82 4.7 138
Button hole
clearance [mm]
Value [%]
Button hole
clearance [mm]
Value [%]
Button hole
clearance [mm]
Value [%]