Ducati Superbike 1199 Panigale ABS Page 248 Owner'S Manual Download

Page: 248 / 300

Side fairings

To remove the fairings, use the Allen wrench fitted

under the seat to loosen the following:
-

the two screws (1) securing the fairing panels to

the brackets;

the four screws (2) securing the fairing panels to

the headlight fairing;

the three screws (3) securing the fairing panels

to the frame;

the two screws (4) located under the fairing that

join the right fairing panel to the left fairing panel;

the two screws (5) securing the fairing panels at

the center;

the two screws (6) securing the front of the

fairing to the headlight fairing.

Note

Be careful of the splash guard, which is released

by the fairing panel fastening.

Note

To refit the left fairing panel, lower the side

stand and pass it through the hole in the panel.

Fig 161

Fig 162

247

Summary of Contents for Superbike 1199 Panigale ABS













































































































































































































































































































Search results

Summary of Contents for Superbike 1199 Panigale ABS

Reviews:

Related manuals for Superbike 1199 Panigale ABS

Brands by name

Popular brands

Ducati Superbike 1199 Panigale ABS, Owner'S Manual

Search results

Summary of Contents for Superbike 1199 Panigale ABS

Reviews:

Related manuals for Superbike 1199 Panigale ABS

Brands by name

Popular brands