Ducati Superbike 1199 Panigale ABS Page 62 Owner'S Manual Download

Page: 62 / 300

When the system requests rider to confirm the riding

mode change, the procedure will output an error if:
-

the throttle twistgrip is open, brakes are

activated and the vehicle is in motion; in this case

CLOSE THROTTLE AND RELEASE BRAKES

error is displayed and the procedure for changing

riding mode will not be completed unless the

rider closes the throttle and releases the brakes

or the vehicle is stopped (zero speed) within 5

seconds. When the procedure is not successful

the Standard Screen is displayed.

Note

If the change of riding mode is associated with

the ABS change of state from ON to OFF or vice-

versa, the instrument panel also starts the procedure

for disabling or activating the ABS, respectively, upon

confirmation of the selected riding mode.

299

CLOSE

THROTTLE

AND

RELEASE

BRAKES

km/h

Fig 26

Summary of Contents for Superbike 1199 Panigale ABS













































































































































































































































































































Search results

Summary of Contents for Superbike 1199 Panigale ABS

Reviews:

Related manuals for Superbike 1199 Panigale ABS

Brands by name

Popular brands

Ducati Superbike 1199 Panigale ABS, Owner'S Manual

Search results

Summary of Contents for Superbike 1199 Panigale ABS

Reviews:

Related manuals for Superbike 1199 Panigale ABS

Brands by name

Popular brands