manualshive.com logo in svg

Ducati Superbike 1199 Panigale ABS, Owner'S Manual

Share
Download
Ducati Superbike 1199 Panigale ABS Owner'S Manual Download Page 264

Headlight

Gain access to the left bulb.

Turn the ring nut on upper bulb holder

counterclockwise and remove the burnt-out bulb.

Replace the bulb with an identical one. Turn the ring

nut clockwise to lock.

Gain access to the right bulb and replace it using the

same procedure described for the left bulb.

Important

To change headlight bulbs, it is not necessary to

disconnect main wiring harness cable from headlight

body.

Note

Do not touch the transparent part of the new

bulb with the hands. This would cause it to blacken

thereby reducing bulb brilliancy.

Attention

The headlight might fog up if the vehicle is used

under the rain or after washing. Switch headlight on

for a short time to dry up any condensate.

Replacing the parking light bulb

LED parking lights are maintenance-free.

263

Summary of Contents for Superbike 1199 Panigale ABS













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands