manualshive.com logo in svg

Ducati Superbike 1199 Panigale ABS, Owner'S Manual

Share
Download
Ducati Superbike 1199 Panigale ABS Owner'S Manual Download Page 200

Parking function

Note

If there is a sudden interruption in the battery

while the function is active, the instrument panel will

disable the function when the voltage is restored.

The "Parking" function activates the front and rear

parking lights when the vehicle is turned off so it is

visible when parked. The function is activated by

pressing the button (5, Fig 119) for 3 seconds during

the first 60 seconds after the motorcycle was turned

off (after key-off).

Once the function is activated, the PARKING icon is

displayed for 3 seconds and the lights stay on as long

as the battery voltage is ≤ 12.2 V. If voltage is < (below)

12.7 V the lights turn off automatically in order to save

battery charge.

Fig 120

To interrupt the function, turn the vehicle on and off

(Key-On / Key-Off).

Important

The frequent use of this function can

considerably reduce the battery charge. We

recommend using this function only when really

necessary.

199

Summary of Contents for Superbike 1199 Panigale ABS













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands