manualshive.com logo in svg

Ducati Superbike 1199 Panigale ABS, Owner'S Manual

Share
Download
Ducati Superbike 1199 Panigale ABS Owner'S Manual Download Page 228

Adjusting the front fork

The front fork used on this motorcycle has rebound,

compression and spring preload adjustment.

Use the external screw adjusters to make

adjustments.
1) to adjust the rebound damping (1, Fig 146);

2) to adjust the preload of the inner springs

(2, Fig 146);

3) to adjust the compression damping (3, Fig 147).

Position the motorcycle on its side stand so that it is

stable.

Turn the adjuster (1) at the top end of each fork leg

with a flat screwdriver to adjust rebound damping.

Turn the adjuster (3) on fork leg bottom with a flat

screwdriver to adjust compression damping.

-

+

2

1

Fig 146

-

+

3

Fig 147

227

Summary of Contents for Superbike 1199 Panigale ABS













































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands