![background image](http://html1.mh-extra.com/html/ducati/superbike-1199-panigale-abs/superbike-1199-panigale-abs_owners-manual_2537766266.webp)
Beam setting
Note
The headlight features a double beam
adjustment, one for the right beam and one for the
left beam
To check the headlight aim, place the motorcycle
upright with the tires inflated to the correct pressure
and one person sitting astride the motorcycle. The
motorcycle should be perfectly vertical, with its
longitudinal axis at right angles to a wall or screen at
a distance of 32.8 feet (10 meters). Draw a horizontal
line corresponding to the center of the headlamp and
a vertical one in line with the longitudinal axis of
motorcycle. If possible, perform this check in dim
light. Turn the low beam on and adjust both the right-
hand and left-hand light beam: The height of the light
spot (measured at the upper limit between dark and
lit-up area) should not exceed 9/10th of the height
from ground of headlamp center.
10 m
32.8 ft
9
10
x
x
Fig 181
Note
The procedure described here is in compliance
with the Italian Standard establishing the maximum
height of the light beam. Owners in other countries
will adapt said procedure to the provisions in force in
their countries.
265
Summary of Contents for Superbike 1199 Panigale ABS
