manualshive.com logo in svg

Ducati Superbike 1199 Panigale ABS, Owner'S Manual, Page: 188 / 300

Share
Download
Ducati Superbike 1199 Panigale ABS Owner'S Manual Download Page 188

Other functions

UP-MAP

This function is used as an interface for uploading the

Performance settings from the UP-MAP device (pen

drive) to the engine control unit, after installing the

Performance exhaust kit (part no. 96450211B) -

Performance muffler kit (part no. 96450311B).

Attention

FOR COMPETITION USE ONLY.

This product is legal for closed-course competition

use only. Road use is forbidden.

Note

The Performance exhaust kit (part no.

96450211B) and Performance muffler kit (part no.

96450311B) can be purchased at a Ducati Dealer or

Authorized Service Center.

Attention

The Performance exhaust kit (part no.

96450211B) and Performance muffler kit (part no.

96450311B) must be installed at a Ducati Dealer or

Authorized Service Center.

The device can be used with key ON but engine

stopped.

When the UP-MAP is connected to the vehicle, these

conditions are checked and, if they are all verified, the

UP-MAP, engine control unit and instrument panel

will start communicating.

187

Summary of Contents for Superbike 1199 Panigale ABS













































































































































































































































































































Reviews:

No comments