Ducati Superbike 1199 Panigale ABS Page 285 Owner'S Manual Download

Page: 285 / 300

Engine

Twin cylinder, four-stroke, 90° "L" type, longitudinal,

with deep sump die-cast crankcase.

Bore: 4.41 in (112 mm).

Stroke: 2.4 in (60.8 mm).
Total displacement, cu. cm:

1198

Compression ratio: 12.5 ± 0.5:1

Max. crankshaft power (95/1/EC), kW/HP:
143 kW/195 HP at 10750 rpm

Max. torque at crankshaft (95/1/EC):
132 Nm / 13.5 kgm / 98.1 lb-ft at 9000 rpm
Maximum rpm:

11,300

Important

Do not exceed the specified rpm limits in any

running conditions.

284

Summary of Contents for Superbike 1199 Panigale ABS













































































































































































































































































































Search results

Summary of Contents for Superbike 1199 Panigale ABS

Reviews:

Related manuals for Superbike 1199 Panigale ABS

Brands by name

Popular brands

Ducati Superbike 1199 Panigale ABS, Owner'S Manual

Search results

Summary of Contents for Superbike 1199 Panigale ABS

Reviews:

Related manuals for Superbike 1199 Panigale ABS

Brands by name

Popular brands