Ducati Multistrada MTS 1200S D-Air Page 48 Owner'S Manual Download

Page: 48 / 443

OPERATION STATUS

AIRBAG WARNING LIGHTS

AIRBAG - IN ERROR

JACKETS - CONNECTED / NOT CONNECTED
System is in error mode whenever an error is de-

tected on bike system, whether jackets are con-

nected or not. Under this condition, the connection

with jackets is interrupted and such condition is sig-

nalled through the warning light coming steady on.

OFF

AIRBAG - LOW BATTERY VOLTAGE

JACKETS - CONNECTED / NOT CONNECTED
System is under low battery voltage conditions

(low-power mode) whenever battery voltage read-

ing is below the minimum level necessary for sys-

tem correct operation (7.5 Volt), whether jackets are

connected or not. When system is in low-power

mode, airbag protection is not available.
This condition, whether jackets are connected or

not, is signalled to the user through the warning

light coming steady on. Jacket warning lights are

ON or OFF if the corresponding jacket is connected.

if the RIDER jack-

et is connected

and is OK

OFF

if the RIDER jack-

et is not connec-

ted

if the PASSEN-

GER jacket is con-

nected and is OK

OFF

if the PASSEN-

GER jacket is not

connected

Summary of Contents for Multistrada MTS 1200S D-Air




























































































































































































































































































































































































































































Search results

Summary of Contents for Multistrada MTS 1200S D-Air

Reviews:

Related manuals for Multistrada MTS 1200S D-Air

Brands by name

Popular brands

Ducati Multistrada MTS 1200S D-Air, Owner'S Manual

Search results

Summary of Contents for Multistrada MTS 1200S D-Air

Reviews:

Related manuals for Multistrada MTS 1200S D-Air

Brands by name

Popular brands