manualshive.com logo in svg

Ducati Multistrada MTS 1200S D-Air, Owner'S Manual, Page: 372 / 443

Share
Download
Ducati Multistrada MTS 1200S D-Air Owner'S Manual Download Page 372

Adjusting the rear shock absorber

The rear shock absorber has adjusters that enable you

to suit the setting to the load on the motorcycle.

Warning

The shock absorber is filled with gas under

pressure and may cause severe damage if taken apart

by unskilled persons.

When carrying a passenger and luggage, set the rear

shock absorber spring to proper preload to improve

motorcycle handling and keep safe clearance from

the ground. You may find that rebound damping

needs adjusting as well. The shock absorber is

adjusted by electric impulses sent by the instrument

panel to the adjusters inside the shock absorber body.

Fig. 258

371

Summary of Contents for Multistrada MTS 1200S D-Air




























































































































































































































































































































































































































































Reviews:

No comments