manualshive.com logo in svg

Ducati Multistrada MTS 1200S D-Air, Owner'S Manual, Page: 317 / 443

Share
Download
Ducati Multistrada MTS 1200S D-Air Owner'S Manual Download Page 317

On the front side of the jacket/waistcoat turning on/

off system, a slider (E) allows you to turn the jacket/

waistcoat device on and off. Slider (E) in upper

position (I) turns the device on whereas if in the lower

position (O) it turns the device off.

On the side, two symbols indicate the status of the

Jacket/Waistcoat on/off system:
-

(I) System on.

-

(O) System off.

Important

If upon turning on the system (cursors in

position "I") the SIM CARD is not inserted in the

device, the remote control will vibrate to indicate that

the system is turning off due to the missing SIM

CARD.

E

E

I

O

Fig. 196

316

Summary of Contents for Multistrada MTS 1200S D-Air




























































































































































































































































































































































































































































Reviews:

No comments