Ducati Multistrada MTS 1200S D-Air Page 411 Owner'S Manual Download

Page: 411 / 443

Check engine oil level

Engine oil level can be checked through the sight

glass (1) located onto clutch cover. Oil level must be

checked with the motorcycle perfectly upright and

the engine cold. Oil level should be between the

marks on the sight glass. If the level is low, top up

with engine oil.

Use Shell Advance 4T Ultra 15W-50 oil (SM/MA2) or

an oil (15-W60) complying with API SM and/or JASI

MA2 and/or ACEA A3/B3 specifications.

Remove the oil filler cap (2) and top up until the oil

reaches the required level. Refit the plug.

Important

Engine oil and oil filters must be changed by a

Ducati Dealer or authorised Service Centre at the

intervals specified in the scheduled maintenance

chart reported in the Warranty Card.

Fig. 292

410

Summary of Contents for Multistrada MTS 1200S D-Air




























































































































































































































































































































































































































































Search results

Summary of Contents for Multistrada MTS 1200S D-Air

Reviews:

Related manuals for Multistrada MTS 1200S D-Air

Brands by name

Popular brands

Ducati Multistrada MTS 1200S D-Air, Owner'S Manual

Search results

Summary of Contents for Multistrada MTS 1200S D-Air

Reviews:

Related manuals for Multistrada MTS 1200S D-Air

Brands by name

Popular brands