Ducati Multistrada MTS 1200S D-Air Owner'S Manual Download Page 178

Page: 178 / 443

ABS off-road setting (ABS ENDURO)

When this warning is activated, it is necessary to ride

carefully because ABS setting in use is the one

designed for dirt roads and only the front wheel

braking is controlled by the system in this case.

This warning is activated whenever ABS level 01 is

selected.

Warning

In this case, Ducati recommends to ride

carefully and use this type of ABS setting NOT for

road, but for off-road use only.

Fig. 78

177

Summary of Contents for Multistrada MTS 1200S D-Air




























































































































































































































































































































































































































































Search results

Summary of Contents for Multistrada MTS 1200S D-Air

Reviews:

Ducati Multistrada MTS 1200S D-Air, Owner'S Manual, Page: 178 / 443

Search results

Summary of Contents for Multistrada MTS 1200S D-Air

Reviews: