Ducati Multistrada MTS 1200S D-Air Owner'S Manual Download Page 316

Page: 316 / 443

D-Air system use

D-Air

turning on and off on jacket/waistcoat

The device on the jacket/waistcoat (D) is provided

with a remote on/off system located on the band right

side. A vibra motor inside the system communicates,

through coded vibrations, the Jacket/Waistcoat

operation status.

Following are the meanings of the vibrations

generated by the vibra motor:
-

1. 1-second vibration.
Turning off warning of the D-Air

system

installed in your jacket/waistcoat.

The causes could be:

missing or removed SIM CARD;

missing radio connection with your

motorcycle for more than 10 minutes;

Airbag in degraded operating mode (airbag

does not ensure any protection in case of

bike skidding).

Fig. 195

2. 1-second triple vibration.

Lost pairing with the system installed on the

motorcycle.

315

Summary of Contents for Multistrada MTS 1200S D-Air




























































































































































































































































































































































































































































Search results

Summary of Contents for Multistrada MTS 1200S D-Air

Reviews:

Brands by name

Popular brands

Ducati Multistrada MTS 1200S D-Air, Owner'S Manual

Search results

Summary of Contents for Multistrada MTS 1200S D-Air

Reviews:

Brands by name

Popular brands