manualshive.com logo in svg

Ducati Multistrada MTS 1200S D-Air, Owner'S Manual, Page: 26 / 443

Share
Download
Ducati Multistrada MTS 1200S D-Air Owner'S Manual Download Page 26

These parts may be hot and ignite the coolant,

which will subsequently burn with invisible flames.

Coolant (ethylene glycol) is irritant and poisonous

when ingested. Keep away from children. Never

remove the radiator cap when the engine is hot. The

coolant is under pressure and will cause severe

burns.

The cooling fan operates automatically: keep hands

well clear and make sure your clothing does not snag

on the fan.

Battery

Warning

The battery gives off explosive gases; never

cause sparks or allow naked flames and cigarettes

near the battery. When charging the battery, ensure

that the working area is properly ventilated.

25

Summary of Contents for Multistrada MTS 1200S D-Air




























































































































































































































































































































































































































































Reviews:

No comments