manualshive.com logo in svg

Ducati Multistrada MTS 1200S D-Air, Owner'S Manual, Page: 47 / 443

Share
Download
Ducati Multistrada MTS 1200S D-Air Owner'S Manual Download Page 47

OPERATION STATUS

AIRBAG WARNING LIGHTS

AIRBAG - DEGRADED OPERATION

JACKETS - CONNECTED / NOT CONNECTED
System is in degraded operating conditions when

the airbag does not ensure any protection against

skidding. This condition, whether jackets are con-

nected or not, is signalled to the user through the

quick blinking of the warning light.
Jacket warning lights are ON or OFF if the corre-

sponding jacket is connected.

ON

if the RIDER jack-

et is connected

and is OK

OFF

if the RIDER jack-

et is not connec-

ted

QUICK BLINK

ON

if the PASSEN-

GER jacket is con-

nected and is OK

OFF

if the PASSEN-

GER jacket is not

connected

AIRBAG – OK and AFTER AN INPUT TO OPEN THE

AIRBAG

JACKETS - CONNECTED / NOT CONNECTED
After an input to open the airbag, system signals

this condition; it enters a permanent lock status if

at least one jacket is connected (the dealer inter-

vention is necessary to clear this lock) or a tempo-

rary lock status if no jacket is connected. After this

condition occurs, the connection with jackets will

be interrupted and such condition will be signalled

through the warning light coming steady on.

OFF

ON

OFF

46

Summary of Contents for Multistrada MTS 1200S D-Air




























































































































































































































































































































































































































































Reviews:

No comments