manualshive.com logo in svg

Ducati Multistrada MTS 1200S D-Air, Owner'S Manual, Page: 115 / 443

Share
Download
Ducati Multistrada MTS 1200S D-Air Owner'S Manual Download Page 115

To save battery charge, two conditions are

envisaged:
1) with engine running, if engine is turned off but

instrument panel is still on, after 30 seconds

suspensions are no longer powered;

2) with engine off, if instrument panel is turned on

but engine is still off, after 30 seconds

suspensions are no longer powered.

Note

These suspensions, when not powered, are

particularly hard due to the high hydraulic damping,

as it happens when bike is off. The transition from

powered suspensions to suspensions off can be

perfectly perceived.

Note

With key-off (bike off), suspension is hard as

valves, being not powered, keep hydraulic damping

at the minimum level.

114

Summary of Contents for Multistrada MTS 1200S D-Air




























































































































































































































































































































































































































































Reviews:

No comments