manualshive.com logo in svg

Ducati Multistrada MTS 1200S D-Air, Owner'S Manual, Page: 9 / 443

Share
Download
Ducati Multistrada MTS 1200S D-Air Owner'S Manual Download Page 9

maintenance. In case of any doubts, please contact a

Dealer or Authorised Service Centre.

Warning symbols used in the manual

Several kinds of warnings are used as an alert of the

possible hazards for you or other persons such as:
-

Safety labels on the motorcycle;

-

Safety messages preceded by a warning symbol

and either WARNING or IMPORTANT.

Warning

Failure to comply with these instructions may

put you at risk, and could lead to severe injury or even

death of the rider or other persons.

Important

Possibility of damaging the motorcycle and/or

its components.

Note

Additional information about the current

operation.

The terms RIGHT and LEFT are referred to the

motorcycle viewed from the riding position.

8

Summary of Contents for Multistrada MTS 1200S D-Air




























































































































































































































































































































































































































































Reviews:

No comments