manualshive.com logo in svg

Ducati Multistrada MTS 1200S D-Air, Owner'S Manual, Page: 11 / 443

Share
Download
Ducati Multistrada MTS 1200S D-Air Owner'S Manual Download Page 11

D-Air

®

 device preliminary instructions and

recommendations

Warning

The D-Air

®

 protection system was developed by

DAINESE and tested by TÜV SÜD to be used on

asphalt only. Therefore, in order to avoid any

undesired activation of the Jacket and/or Waistcoat,

the relevant electronic device must be disabled when

riding off-road - by "off-road" we mean the track use

as well. Warning: with Jacket/Waistcoat electronic

device off, the rider and passenger protection is

disabled.

-

The D-Air

®

 system is a new, smart, tested device

conceived to be used on the road only. When

riding on the track or off-road - by "off-road" we

mean on uneven, steep and low-grip roads - it is

compulsory to disable the device on the garment

(jacket or waistcoat) available at a Ducati Dealer

or Ducati authorised service centre. The device

installed on the garment (Jacket or Waistcoat)

communicates with the control unit and the

sensors installed on the motorcycle. There is no

physical/mechanical element linking the
motorcycle and the user. D-Air

®

 is able to identify

front, lateral and rear impacts and skidding, and

to transmit via radio the inflation input to the

system installed in the garment.

10

Summary of Contents for Multistrada MTS 1200S D-Air




























































































































































































































































































































































































































































Reviews:

No comments