manualshive.com logo in svg

Ducati Multistrada MTS 1200S D-Air, Owner'S Manual, Page: 101 / 443

Share
Download
Ducati Multistrada MTS 1200S D-Air Owner'S Manual Download Page 101

The following table indicates the most suitable level of ABS intervention for the various riding types as well

as the default settings in the "Riding Mode" that can be selected by the rider:

ABS

RIDING MODE

CHARACTERISTIC

DEFAULT

OFF

 

The ABS is disabled

NO

1

OFF-ROAD

This level is designed exclusively for off-

road use, for expert riders (not recommen-

ded for road use). ABS in this level only con-

trols the front wheel, and thus allows rear

wheel lockup (thus helping braking efficien-

cy on dirt roads).

The system in this level does NOT control

lift-up, there is NO front-to-rear combined

braking and the cornering feature is NOT

active.

It is the default level for the

"ENDURO" Riding Mode

100

Summary of Contents for Multistrada MTS 1200S D-Air




























































































































































































































































































































































































































































Reviews:

No comments