Drucegrove DragonFly User Manual 1.4
Page 25
Identity XML File
The DragonFly Ethernet network settings, including tags to identify the unit position within a building over the
network, are stored in the Identity.xml file, which can be found under “\Storage Card\Config\”. This file must always
be present for the software to load. The Identity.xml file consists of three main setting groups; IdentitySettings,
NetworkSettings and Groups.
Identity Settings
The following settings can be defined in the Settings.xml file, under IndcatorSettings:
IndicatorType
Optional free text string value, empty by default.
Used to identify the DragonFly device type over the Ethernet network.
ScreenType
Optional free text string value, empty by default.
Used to identify the screen type and/or size over the Ethernet network.
FloorPositionAddress
Integer value, 0 by default.
Sets the floor position address, which is used to display lantern arrows and
activate gong outputs at the correct floor. The floor position address equates
to the floor address given out by the IND055 2-Wire Controller (represented
in hexadecimal on the IND055 LCD display). A value of zero represents
elevator car position.
IndicatorFloorDesignation
Optional free text string value, empty by default.
Used to identify the landing floor level over the Ethernet network.
IndicatorId
Optional free text string value, “0” by default.
Used to identify the unit over the Ethernet network.
IndicatorLiftNumber
Optional free text string value, empty by default.
Used to identify the elevator number over the Ethernet network.
IndicatorLiftGroup
Optional free text string value, empty by default.
Used to identify the elevator group over the Ethernet network.
IndicatorBuildingName
Optional free text string value, empty by default.
Used to identify the building name over the Ethernet network.
This setting is intended for use with future internet connectivity.
IndicatorSiteName
Optional free text string value, empty by default.
Used to identify the site name over the Ethernet network.
This setting is intended for use with future internet connectivity.
Network Settings
The following settings can be defined in the Settings.xml file, under NetworkSettings:
NetworkEnableDHCP
Boolean value, false by default.
Enables the Dynamic Host Configuration Protocol (DHCP) for automatically
assigning the IP Address and settings over the Ethernet network with a DHCP
server. If no DHCP server is present, or the IP Address is configured manually,
this setting should be set to false.
NetworkIPAddress
The IP Address of the unit on the Ethernet network.
This setting is ignored if DHCP is enabled.
NetworkSubnetMask
The Subnet Mask of the unit on the Ethernet network.
This setting is ignored if DHCP is enabled.
NetworkDefaultGateway
The Default Gateway of the unit on the Ethernet network.
This setting is ignored if DHCP is enabled.
NetworkDNSServer
The DNS Server of the unit on the Ethernet network.
This setting is ignored if DHCP is enabled.
