Drucegrove DragonFly User Manual 1.4
Page 23
Network Settings
The following settings can be defined in the Settings.xml file, under NetworkSettings:
UDPPort
Integer value, 3683 by default.
Sets the port for the UDP receiver and transmitter, which is used to
communicate with other DragonFly units and remote administration and
configuration software over the Ethernet network. All units and software on
the network should be configured to use the same port, and 3683 is
recommended as a standard Drucegrove default.
EnableUDP
Boolean value, true by default.
Enables or disables the UDP receiver and transmitter, which is used to
communicate with other DragonFly units and remote administration and
configuration software over the Ethernet network.
EnableHTTP
Boolean value, true by default.
Enables or disables the HTTP web server, which is used for the HTTP control
panel and remote access to files and screenshots.
Date and Time Settings
The following settings can be defined in the Settings.xml file, under DateTimeSettings:
TimeZone
String value, “GMT Standard Time” by default.
Defines the system time zone.
AutoDaylightSaving
Boolean value, true by default.
Enable or disable automatic daylight saving time adjustment.
AutoSyncInternetTime
Boolean value, true by default.
Enable or disable automatic synchronisation of time and date to an internet
based time server.
InternetTimeServer
String value, “time-nw.nist.gov” by default.
Defines the URL of the internet time server to use for synchronisation.
AutoSyncInternetInterval
Defines the interval between internet time synchronisation events.
The setting can be set to one of the following values (EveryDay is default):
Every15Mins
EveryHour
Every6Hours
Every12Hours
EveryDay
EveryWeek
AutoSyncLANTime
Boolean value, true by default.
If enabled, all DragonFly units will synchronise their clocks between
themselves locally over the Ethernet network every day at 02:00.
