VigorPro5510 Series User’s Guide
83
Address Type
Determine the address type for the IP address.
Select
Single Address
if this object contains one IP address
only.
Select
Range Address
if this object contains several IPs
within a range.
Select
Subnet Address
if this object contains one subnet for
IP address.
Select
Any Address
if this object contains any IP address.
Start IP Address
Type the start IP address for Single Address type.
End IP Address
Type the end IP address if the Range Address type is selected.
Subnet Mask
Type the subnet mask if the Subnet Address type is selected.
Invert Selection
If it is checked, all the IP addresses except the ones listed
above will be applied later while it is chosen.
Below is an example of IP objects settings.
Summary of Contents for VigorPro 5510 Series
