Draytek VigorBX 2000 Series User Manual Download

Page: 438 / 777

VigorBX 2000 Series User’s Guide

426

The DNS Filter monitors DNS queries on UDP port 53 and will pass the DNS query information

to the WCF to help with categorizing HTTPS URL's.

DNS can be specified in

LAN>>General Setup

by using the server (e.g., 168.95.1.1) on router

or external DNS server (e.g., 8.8.8.8). If the router server is used,

DNS Filter General

Setting

will be applied to DNS query from clients on LAN. However, if the external DNS server is used,

DNS Filter Profile

will be applied to DNS query coming from clients on LAN.

Info

For DNS filter must use the WCF service profile to filter the packets,
therefore WCF license must be activated first. Otherwise, DNS filter does

not have any effect on packets.

Available settings are explained as follows:

Item Description

DNS Filter Profile Table

It displays a list of different DNS filter profiles (with

specified WCF and UCF).
Click the profile link to open the following page. Then, type

the name of the profile and specify WCF/UCF based on your
requirement.

Summary of Contents for VigorBX 2000 Series










































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for VigorBX 2000 Series

Reviews:

Related manuals for VigorBX 2000 Series

Brands by name

Popular brands

Draytek VigorBX 2000 Series, User Manual

Search results

Summary of Contents for VigorBX 2000 Series

Reviews:

Related manuals for VigorBX 2000 Series

Brands by name

Popular brands