Draytek VigorBX 2000 Series, User Manual

Page: 555 / 777

VigorBX 2000 Series User’s Guide 543
To set a new profile, please do the steps listed below:
1. Click the Mail Server tab, and click the number (e.g., #1) under Index column for
configuration in details.
2. The configuration page will be shown as follows:
Available settings are explained as follows:
Item Description
Profile Name Type a name for such mail service profile. The maximum
length of the name you can set is 31 characters.
SMTP Server Type the IP address of the mail server.
SMTP Port Type the port number for SMTP server.
Sender Address Type the e-mail address of the sender.
Use SSL Check this box to use port 465 for SMTP server for some
e-mail server uses https as the transmission method.
Authentication The mail server must be authenticated with the correct
username and password to have the right of sending message
out. Check the box to enable the function.
Username – Type a name for authentication. The maximum
length of the name you can set is 31 characters.
Password – Type a password for authentication. The
maximum length of the password you can set is 31
characters.