Draytek VIGORAP 902 User Manual Download

Page: 255 / 272

VigorAP 902 User’s Guide

245

(1) Please tick Enable Wireless LAN.

(2) Choose the Mode.

Note

: To utilize the Universal Repeater Mode on VigorAP 902, it’s required not

to choose 11a mode here on Vigor2830n

(3) Name a SSID.

(4) Choose a channel.

Note

: To avoid signal interference, it’s suggested to do a

Scan

Wireless

LAN >> AP Discovery

, and choose an unoccupied or not-so-crowded channel.

(5) Click

Setting the Security. Please go to

Wireless LAN >> Security

(1) Choose the Mode.

(2) Give a Pre-Shared Key.

Note

: The Mode and Pre-shared Key will be needed when setting on VigorAP

902, and it’s suggested to memorize them.

(3) Click

Summary of Contents for VIGORAP 902

















































































































































































































































































Search results

Summary of Contents for VIGORAP 902

Reviews:

Related manuals for VIGORAP 902

Brands by name

Popular brands

Draytek VIGORAP 902, User Manual

Search results

Summary of Contents for VIGORAP 902

Reviews:

Related manuals for VIGORAP 902

Brands by name

Popular brands