Draytek VIGORAP 902 User Manual Download

Page: 14 / 272

VigorAP 902 User’s Guide

Interface

Description

0/1 Power

switch.

PWR: Connecter for a power adapter.

LAN B

Connecter for xDSL / Cable modem (Giga level)
or router.

LAN A4, A2,

A3 (PoE)

Connecter for xDSL / Cable modem (Giga level) /
computer or router.

LAN A3 is used for PoE connection (for indoor
use).

WLAN

ON/OFF WPS

Wireless band will be switched /changed
according to the button pressed and released. For
example,



2.4G (On) and 5G (On) – in default.



2.4G (Off) and 5G (On) – pressed and released
the button once.



2.4G (On) and 5G (Off) – pressed and released
the button twice.



2.4G (Off) and 5G (Off) – pressed and released
the button three times.

WPS - When WPS function is enabled by web
user interface, press this button for more than 2
seconds. The router will wait for any wireless
client connecting to it through WPS.

USB

Connecter for a USB device (for temperature
sensor).

Restore the default settings. Usage: Turn on
VigorAP 902. Press the button and keep for more
than

seconds. Then the device will restart with

the factory default configuration.

Note:

For the sake of security, make the accessory kit away from children.

Summary of Contents for VIGORAP 902

















































































































































































































































































Search results

Summary of Contents for VIGORAP 902

Reviews:

Related manuals for VIGORAP 902

Brands by name

Popular brands

Draytek VIGORAP 902, User Manual

Search results

Summary of Contents for VIGORAP 902

Reviews:

Related manuals for VIGORAP 902

Brands by name

Popular brands