Draytek VIGORAP 902, User Manual

Page: 45 / 272

VigorAP 902 User’s Guide 35
902.
VLAN ID – Type the number as VLAN ID tagged on the
transmitted packet. “0” means no VALN tag.
DHCP Server
Configuration DHCP stands for Dynamic Host Configuration Protocol. DHCP
server can automatically dispatch related IP settings to any local
user configured as a DHCP client.
Enable Server - Enable Server lets the modem assign IP address
to every host in the LAN.

Start IP Address - Enter a value of the IP address pool for
the DHCP server to start with when issuing IP addresses. If
the 1st IP address of your modem is 192.168.1.2, the
starting IP address must be 192.168.1.3 or greater, but
smaller than 192.168.1.254.

End IP Address - Enter a value of the IP address pool for
the DHCP server to end with when issuing IP addresses.

Subnet Mask - Type in an address code that determines
the size of the network. (Default: 255.255.255.0/ 24)

Default Gateway - Enter a value of the gateway IP address
for the DHCP server.

Lease Time - It allows you to set the leased time for the
specified PC.

Primary DNS Server - You must specify a DNS server IP
address here because your ISP should provide you with
usually more than one DNS Server. If your ISP does not
provide it, the modem will automatically apply default
DNS Server IP address: 194.109.6.66 to this field.

Secondary DNS Server - You can specify secondary DNS
server IP address here because your ISP often provides you
more than one DNS Server. If your ISP does not provide it,
the modem will automatically apply default secondary
DNS Server IP address: 194.98.0.1 to this field.
Relay Agent - Specify which subnet that DHCP server is located
the relay agent should redirect the DHCP request to.

DHCP Server IP Address for Relay Agent - It is available
when Enable Relay Agent is selected. Set the IP address of
the DHCP server you are going to use so the Relay Agent
can help to forward the DHCP request to the DHCP server.

Primary DNS Server - You must specify a DNS server IP
address here because your ISP should provide you with
usually more than one DNS Server. If your ISP does not
provide it, the modem will automatically apply default
DNS Server IP address: 194.109.6.66 to this field.

Secondary DNS Server - You can specify secondary DNS
server IP address here because your ISP often provides you
more than one DNS Server. If your ISP does not provide it,
the modem will automatically apply default secondary
DNS Server IP address: 194.98.0.1 to this field.