Draytek VIGORAP 902 User Manual Download

Page: 235 / 272

VigorAP 902 User’s Guide

225

This page allows you to specify the port number for HTTP and HTTPS server.

Available parameters are explained as follows:

Item Description

Device Name

Name

- The default setting is VigorAP 902. Change the

name if required.

Management Port Setup

HTTP port/HTTPS port

-Specify user-defined port

numbers for the HTTP and HTTPS servers.

Wi-Fi Hardware Button
Setup

Stop people manually disabling the wireless if they do not
have the right of administration to access to the device.

Enable

– Choose it to enable the hardware button function.

Disable

– Choose it to disable the hardware button function.

Telnet Server

Enable

– The administrator / user can access into the

command line interface of VigorAP remotely for configuring
settings.

Disable

– The administrator / user is unable to access into the

command line interface of VigorAP remotely for configuring
settings.

LED Setup

The color of LED (on or flashing) can be switched on or off
to meet your favor.

Enable

– The LED will flash to indicate VigorAP is ready

and able to work normally.

Disable

–The LEDs blink always since VigorAP is powered

on. Some people might not like that. Therefore the function
of LED is allowed to be disabled to make people feeling

Summary of Contents for VIGORAP 902

















































































































































































































































































Search results

Summary of Contents for VIGORAP 902

Reviews:

Related manuals for VIGORAP 902

Brands by name

Popular brands

Draytek VIGORAP 902, User Manual

Search results

Summary of Contents for VIGORAP 902

Reviews:

Related manuals for VIGORAP 902

Brands by name

Popular brands