Draytek Vigor2926, User Manual

Page: 912 / 968

Vigor2926 Series User’s Guide 896
….
number=13, means Channel 13.
preamble [enable] It means to define the length of the sync field in an 802.11 packet.
Most modern wireless network uses short preamble with 56 bit sync
field instead of long preamble with 128 bit sync field. However,
some original 11b wireless network devices only support long
preamble.
0: disable to use long preamble.
1: enable to use long preamble.
txburst [enable] It means to enhance the performance in data transmission about
40%* more (by enabling Tx Burst). It is active only when both sides
of Access Point and Station (in wireless client) invoke this function
at the same time.
0: disable the function.
1: enable the funciton.
ssid[ssid_num enable
ssid_name [hidden_ssid]] It means to set the name of the SSID, hide the SSID if required.
ssid_num: Type 1, 2, 3 or 4 to specify SSID1, SSID2, SSID3 or SSID4.
ssid_name: Give a name for the specified SSID.
hidden_ssid: Type 0 to hide the SSID or 1 to display the SSID
Security [SSID_NUMBER]
[mode][key][index] It means to configure security settings for the wirelesss connection.
SSID_NUMBER: Type 1, 2, 3 or 4 to specify SSID1, SSID2, SSID3 or
SSID4.
mode: Available settings are:
disable:
No security.
wpa1x: WPA/802.1x Only
wpa21x: WPA2/802.1x Only
wpamix1x: Mixed (WPA+WPA2/802.1x only)
wep1x: WEP/802.1x Only
wpapsk: WPA/PSK
wpa2psk: WPA2/PSK
wpamixpsk: Mixed (WPA+WPA2)/PSK
wep: WEP
key, index: Moreover, you have to add keys for wpapsk, wpa2psk,
wpamixpsk and wep, and specify index number of schedule profiles
to be followed by the wireless connection.
WEP keys must be in 5/13 ASCII text string or 10/26 Hexadecimal
digit format; WPA keys must be in 8~63 ASCII text string or 64
Hexadecimal digit format.
ratectl [ssid_num enable
upload download] It means to set the rate control for the specified SSID.
ssid_num: Choose 1, 2, 3 or 4 to specify SSID1, SSID2, SSID3 or SSID4.
enable: It means to enable the function of the rate control for the
specified SSID. 0: disable and 1:enable.
upload: It means to configure the rate control for data upload. The
unit is kbps.
download: It means to configure the rate control for data
download. The unit is kbps.
isolate [ssid_num lan
member] It means to isolate the wireless connection for LAN and/or Member.
lan – It can make the wireless clients (stations) with remote-dial
and LAN to LAN users not accessing for each other.
member – It can make the wireless clients (stations) with the same
SSID not accessing for each other.
E E x x a a m m p p l l e e
> wl config mode 11bgn