Draytek Vigor2850 Series, User Manual

Page: 93 / 387

Vigor2850 Series User’s Guide
83
B B r r i i d d g g e e
General page lets you set the first channel. As to set the third channel, please click the
Bridge
tab to open
Bridge
configuration page.
Available settings are explained as follows:
Item Description
Enable
Check this box to enable that channel. Only channel 3 to 8
can be set in this page, for channel 1 to 2 are reserved for
NAT using.
P1 to P4
It means the LAN port 1 to 4. Check the box to designate
the LAN port for channel 3 to 8.
Click
Clear
to remove all the configurations in this page if you do not satisfy it. When you
finish the configuration, please click
OK
to save and exit this page. Or click
Cancel
to abort
the configuration and exit this page.