Draytek Vigor2850 Series User Manual Download Page 154

Page: 154 / 387

Vigor2850 Series User’s Guide

144

Set to Factory Default

Clear all profiles.

Click the number under Index column for settings in detail.

Available settings are explained as follows:

Item Description

Name

Type a name for this profile. Maximum 15 characters are
allowed.

Interface

Choose WAN, LAN or Any to display all the available IP
objects with the specified interface.

Available IP Objects

All the available IP objects with the specified interface
chosen above will be shown in this box.

Selected IP Objects

Click

button to add the selected IP objects in this box.

Summary of Contents for Vigor2850 Series




































































































































































































































































































































































































Search results

Summary of Contents for Vigor2850 Series

Reviews:

Related manuals for Vigor2850 Series

Brands by name

Popular brands

Draytek Vigor2850 Series, User Manual

Search results

Summary of Contents for Vigor2850 Series

Reviews:

Related manuals for Vigor2850 Series

Brands by name

Popular brands