Draytek Vigor2850 Series, User Manual

Page: 49 / 387

Vigor2850 Series User’s Guide
39
Detailed explanation (for IPv4) is shown below:
Item Description
LAN Status Primary DNS-
Displays the primary DNS server address
for WAN interface.
Secondary DNS -
Displays the secondary DNS server
address for WAN interface.
IP Address
-Displays the IP address of the LAN interface.
TX Packets
-Displays the total transmitted packets at the
LAN interface.
RX Packets
-Displays the total received packets at the LAN
interface.
WAN1/WAN2/WAN3
Status
Enable – Yes
in red means such interface is available but
not enabled.
Yes
in green means such interface is enabled.
Line
– Displays the physical connection (VDSL, ADSL,
Ethernet, or USB) of this interface.
Name
– Display the name of the router.
Mode
- Displays the type of WAN connection (e.g.,
PPPoE).
Up Time
- Displays the total uptime of the interface.
IP
- Displays the IP address of the WAN interface.
GW IP
- Displays the IP address of the default gateway.
TX Packets
- Displays the total transmitted packets at the
WAN interface.
TX Rate
- Displays the speed of transmitted octets at the
WAN interface.
RX Packets
- Displays the total number of received packets
at the WAN interface.
RX Rate
- Displays the speed of received octets at the
WAN interface.
Detailed explanation (for IPv6) is shown below:
Item Description
LAN Status IP Address
- Displays the IPv6 address of the LAN
interface..
TX Packets
-Displays the total transmitted packets at the
LAN interface.
RX Packets
-Displays the total received packets at the LAN
interface.
TX Bytes
- Displays the speed of transmitted octets at the
LAN interface.
RX Bytes
- Displays the speed of received octets at the
LAN interface.
WAN IPv6 Status Enable – No
in red means such interface is available but
not enabled.
Yes
in green means such interface is enabled.
No in red means such interface is not available.