Dräger Savina, Instructions For Use Manual

Page: 15 / 132

Operating Concept
15
"Configuration" screen page
For setting equipment parameters:
— Screen contrast
— Alarm volume
— Displayed measured values
— Manual calibration for the O
2
sensor 2
— FiO
2
and Flow Monitoring ON/OFF
— Pmax ON/OFF
— Plateau ON/OFF
— Language, date and time
— MEDIBUS protocol
Configuration 1/4:
Page 1 of 4 available pages of the Configuration menu.
Changing screen pages
To change to the next page:
● press the same key again.
To change to another page:
● press the corresponding key for that page.
To change to the main page for pressure curves:
●
press »Curves « key.
Detailed instructions for use, see "Configuration", pages 47
onwards.
»Standby« key
1 Positioned at bottom right of the front panel.
— To keep the apparatus operational,
e.g. after pre-setting.
or
— to switch on ventilation.
To switch to standby:
1 Hold down » Standby « key for at least 3 seconds
and
2 to confirm = press » Alarm Reset « key.
To switch on ventilation:
1 Press » Standby « key briefly.
065 3
7
388
004 3
7
2
6
1
D
Savina
1
2