Dräger PIR 7000, Instructions For Use Manual

Page: 399 / 420

399
IECEx Certificate
of Conformity
Certificate No.: IECEx UL 07.0009X
Date of Issue: 2014-12-14 Issue No.: 3
Page 3 of 4
Schedule
EQUIPMENT:
Equipment and systems covered by this certificate are as follows:
The Type IDS 01xx stationary infrared gas sensor is intended for continuous detection of combustible or non-
combustible gases and vapors. The sensor is not for use in oxygen-enriched atmospheres. The gas sensor provides a
4 to 20 mA analog output signal that is proportional to the measured gas concentration and an additional digital output.
The sensor assembly consists of a stainless steel enclosure cover and body (cuvette) that houses the main PCB, filter
PCB, and other various electronic components. A sapphire window is located at the base of the body (cuvette), centered
between two heated arms. The cover of the sensor enclosure is provided with a 3/4" NPT or M25 threaded hub for
permanent attachment to an approved terminal box. The integrity of the flameproof enclosure is maintained in the
sensor cover by a glass feed-through disc welded to the cover and in the body (cuvette) by flameproof joints.
Nomenclature for type IDS 01xx:
IDS 01 0 x
I II III
I - Denotes basic gas sensor designation
IDS 01
II - Denotes threaded hub size located on the cover of the sensor
0 - 3/4" - 14 NPT hub
1 - M25 x 1.5 hub
III - Denotes variants with different measurement wavelengths
x - any combination of numbers or letters
CONDITIONS OF CERTIFICATION: YES as shown below:
Ambient Temperature Range is limited to:
T6 : -40°C < Tamb < +40°C; T4 : -40°C < Tamb < +80°C
The flameproof enclosure is not to be opened by the user. The electrical equipment may not be modified. The use of
defective or incomplete parts is not permissible.
IECEx Certificate
of Conformity
Certificate No.: IECEx UL 07.0009X
Date of Issue: 2014-12-14 Issue No.: 3
Page 4 of 4
DETAILS OF CERTIFICATE CHANGES (for issues 1 and above):
Issue 1: Updated to the latest edition of standards.
Issue 2: Addition of an alternative non-metallic material of the cover.
Issue 3: Update of standards to the latest standard editions.