H
2
S
CO
CH
4
Gas-Pro
Quick Start Guide
Gas-Pro
Multi-Gas Confined Space Monitor
M07998/Eng
Issue 2 Jan 2015
IN USE
+ve Safety™
+ve Safety™ (Positive Safety) provides
positive confirmation of detector status prior
to deployment in the field or on return from
site. The front mount tri-colour LED gives
the Safety Manager or Supervisor unrivalled
visibility of the status of the Operator’s
detector.
Charging
•
To charge, insert the charger connected into the socket at the back of
the Gas-Pro.
•
The display will show the battery filling and RED LED’s will flash red
until the battery is full, when they will flash green.
Gas Testing
Crowcon recommends regular gas tests (also known as bump tests) to
confirm sensor operation. A number of flexible and simple solutions are
available:
Q-Test
Quick and simple in-filed gas test and calibration solution.
I-Test
Intelligent wall or desk mount, powered data management
solution.
S-Test
Service and maintenance solution for up to 5 detectors.
If configured to do so, test and calibration can also be completed manually
by using the non-pumped flow plate and following prompts on the screen. If
a test should fail or calibration is due and the Gas-Pro has been manually
zeroed in the last 15 minutes a calibration can also be completed.
See the Gas-Pro User and Operator manual for details.
Safety Information
•
warnings and label information.
•
•
hazardous (safe) areas.
•
+55°C (-4 to 131°F).
Certification Information
IECEx:
IECEx ULD 11.0004X
ATEX:
DEMKO 11 ATEX 1031772X
UL:
5
www.calcert.com
1.800.544.2843
0
5
10
15
20
25
30
